Trend Universal Sub Base C/w Pins & Bush
Description
Line-up pin used with a 16 mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base. Suits collet sizes 1/4inch, 8mm, 12 mm and 1/2inch.
Instructions for fitting
The line-up pin fit into the collet and is plunged through the router base. The line-up bush is fitted into the Unibase and secured. This is then placed over the line-up pin and rotated in order to line up the fixing holes. The Unibase screws are tightened and then the line-up bush can be replaced with any choice of Trend guide bushes. These range from 10 mm up to 30 mm (GB10 - GB32). For larger diameter cutters a 40 mm guide bush (GB40) is available.
Specifications
Catalog Page Number
605
Brand
TREND
Categories
Power Tool Accessories
Category
Router Bits & Accessories
Country of Origin
United Kingdom
Form
Sub Base
Manufacturer
TREND
Type
Router Bits & Accessories
Starting from
£25.29
Pack of 1
incl. VAT
£30.35
selection not available, try a different combination
selection not available, try a different combination
Compare